1/4" (4/7mm) Hose Barb Tee Connector

Product Name: 1/4" (4/7mm) Barbed Tee Fitting – 3-Way Hose Connector

Description: This durable barbed tee connector is designed specifically for 4/7mm (1/4") drip irrigation tubing, allowing you to easily split or branch water flow in three directions. Featuring three precision-molded barbed ends (each approximately 5mm at the tip, expanding to secure fit), it provides a tight, leak-resistant connection when pushed into standard 4mm inner diameter / 7mm outer diameter PE hose.

Key Features:

• Size: Fits 4/7mm irrigation tubing (4mm ID / 7mm OD) on all three ports
• Overall length: ≈35mm
• Material: High-quality UV-resistant black plastic (durable, non-corrosive, suitable for outdoor use)
• Design: Classic T-shape with tapered barbs for easy insertion and strong grip – no tools or clamps required in low-pressure systems
• Applications: Ideal for creating branch lines in drip irrigation, micro-spray setups, connecting main lines to emitters/drippers, greenhouse watering, garden beds, hydroponics, and potted plant systems
• Benefits: Quick installation, reliable seal under typical drip system pressures (up to ≈30-40 PSI), cost-effective way to expand or repair irrigation layouts

1/4" (4/7mm) Hose Barb Elbow Connector

Product Name: 1/4" (4/7mm) Barbed 90° Elbow Fitting – Right-Angle Hose Connector

Description: This 90-degree barbed elbow connector is engineered for 4/7mm drip irrigation tubing, enabling smooth directional changes in your watering lines without kinking or restricting flow. It features two barbed ends (≈5.5mm tip diameter) for secure push-fit connections into standard 4mm ID / 7mm OD polyethylene hose, forming a reliable right-angle turn.

Key Features:

• Size: Compatible with 4/7mm irrigation tubing (4mm ID / 7mm OD) on both ends
• Angle: 90° bend
• Overall dimensions: ≈20.5mm length (compact design)
• Material: Tough, weather-resistant black plastic – built to withstand sun exposure and garden conditions
• Design: Tapered barbs ensure easy push-on installation and excellent holding power; sharp 90° turn maintains good water distribution
• Applications: Perfect for routing tubing around corners, along raised beds, under pots, in tight greenhouse spaces, connecting to micro-sprinklers or drippers at angles, or redirecting main supply lines in drip and micro-irrigation systems
• Benefits: Prevents hose pinching/crushing at bends, simple tool-free setup, long-lasting performance in low- to medium-pressure irrigation setups.

  1/4" 

  1/4" (4/7mm) Hose Double Barb Connector

Key Specifications:

• Fits hose size: 1/4" tubing — specifically inner diameter ≈4 mm and outer diameter ≈7 mm (commonly labeled as 4/7mm PE or vinyl tubing)
• Barb diameter: Approximately 6 mm at the widest point of the barb section
• Overall length: 25 mm
• Connection type: Straight double barb (barb-to-barb) — joins two pieces of the same 4/7mm hose end-to-end
• Material: Tough, corrosion-resistant plastic — lightweight, non-rusting, and suitable for water, fertilizers, and mild chemicals
• Pressure rating: Best for low-pressure systems (typically under 50 PSI / 3.5 bar)

Main Uses:

• • Extend or repair lengths of 1/4" drip irrigation tubing
  • Connect two sections of micro tubing in garden beds, greenhouses, potted plants, or hydroponic setups

Both fittings are compatible with most standard 4/7mm (1/4") drip/micro tubing systems and work best in low-pressure gravity-fed or pump-driven drip irrigation (recommended to use hose clamps for higher pressures or permanent installs). Easy to install – simply warm the tubing end slightly if needed and push firmly onto the barbs for a secure fit.